Thanks for Visiting here

Reboot and select proper boot device error
About- reboot and select proper boot device error
The following information on this error has been compiled by Neo-Smart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.
Sympton Of "Reboot and select proper boot Device"error screen on startup
- Is error ke karn jo bhi cause hai niche diye gye hai
- Incorrect Boot Order:-Apka Hard Disk (HDD) apke boot order me 1st hona chahiye.
![]() |
reboot and select proper boot device error |
Reboot and select proper Boot Device
or Insert Boot Media in selected Boot device
Causes of this Error-
is error ke bahut sare karna hai
Cause 1:-Incorrect boot order
Kabhi kabhi hmlog setting krte krte kuchh yesi settings kar dete hai jise ye problem ati hai uska name hai Boot order setting ye setting apko BIOS me hoti hai is error se bhi ye Problem ati hai.
Cause 1:-Partition Not set as Active
Dusra krn ye bhi hai ki Apka Partition Inactive mood me set hota hai iske karn bhi ye error aa sakti hai.
Fixing “Reboot and select proper Boot Device” on Windows
Fix 1:- Check Boot Order
Set boot order Follow these steps:
- Restart Your computer.
- .Press the necessary key to open BIOS menu.Ye key apke computer ke Manufacture and computer model par depends kregi.Apka key inmese koi ek ho sakti hai Esc, Del, F2, F8, F10 or F12.Agr apke screen par dikhe Boot menu ka option to wahi key dawaye.
- Go to The Boot Tab
- Change the Boot order and List your computer HDD first
- Save the settings6.Restart Your computer.
Fix 2 :- Disable Legacy Boot (UEFI only)
- Restart Your computer.
- Press the necessary key to open BIOS menu.Ye key apke computer ke Manufacture and computer model par depends kregi.Apka key inmese koi ek ho sakti hai Esc, Del, F2, F8, F10 or F12.Agr apke screen par dikhe Boot menu ka option to wahi key dawaye.
- Switch off Lagacy Option:- Lagacy Option ko band kr dena hai yah setting apke computer par depends kregi
- Save the settings.
- Exit UEFI menu
- Restart your computer
Fix 3:- Use DiskPart
Note-Is Process me apka sara data Erase ho jayega so be carefull.
Open your computer as a System recovery and->Troubleshoot->Command Prompt
- Type:
diskpart
- Press Enter
- Type:
select disk 0
Where
0
is the disk’s number where your Windows is installed on. For a full list of disks that are available on your computer, typelist disk
. - Press Enter
- Type:
list partition
- Press Enter
- Type:
select partition 1
Where
1
is your primary partition. - Type:
active
- Press Enter
Fix 4:- Install New Windows
ye sab krne ke bad bhi nhi thik ho rahi hai to ab apko new windows install krna hai use 100% thik ho jayega
HAVE YOU PROBLEM?💖
अगर आपके पास भी कोई problem है तो आप मुझे निचे दिए गये Link पर क्लिक कर के भेज(SEND) सकते है.
Nice work
ReplyDeletethanks
Delete